Communication by light CBL
Company Profile Wireless Solutions Wireless Optical Links Fiberoptic Systems Service & Support Press Releases Downloads
Call Back
News & Events
Contact
Distributors
Jobs
Directions to CBL
Links
Sitemap
Home
Wireless Optical Links
AirLaser - IP transmission
LaserLink - GSM/UMTS
Laser-Link - protocol transparent
LaserLink 4E1
LaserLink STM-1
Management for
LaserLink STM-1

LaserLink 4E1

The LaserLink 4E1 is especially developed for connecting PBX systems with E1-Interfaces, standardised as CCITT G.703 framed/unframed. Up to four independent signals could be connected via RJ45. Four extremely durable light emitting diodes are used, which create an optical aperture of 4 times 60mm in diameter. Thus the systems are very inured to snow, rain and interruptions caused by birds. These systems can also be used in GSM and UMTS networks to connect microcells and basestations.

Complete catalogue for Carrier Solutions: LaserLinks in GSM/UMTS networks (4.1 MB)

An interactive presentation for the GSM/UMTS solutions is available here (3,2 MB)

Technical Data
Laser-Link 4E1
Capacity 4 x E1 = 4 x 2.048 Mbps
Interface G.703
Physical connection Sub-d25, all 120 Ohms
Recommended distance 50 .. 2000 meters depending on climate
Optical performance
Optical system budget at 800 m: 29 dB
Maximum attenuation at distance 36 dB/km at 800 m
Theoretical distance at 10 dB/km
at 30 dB/km
2,100 m
900 m
Minimum visibility at installed distance 470 m at 800 m
Quality of service
G.821/826 BER 10E-8 (unfaded)
Delay of each terminal 8 µsec
Transmitter
Multi beam technology 4 x IR-LED
Wavelength 860 +/- 10 nm
Launched power 4 x 20 mW (eq +19 dBm)
Aperture 4 x 60 mm diameter
Total transmitting area 113 sqcm
Divergence 10 mrad
Laser class 1M, eye safe
Receiver
Aperture 257 mm diameter
Total receiving area 520 sqcm
Field of view 5 mrad
Type Si-PIN-TIA
Sensitivity +3 .. -45 dBm optical (BER 10E-6)
Dynamic Range 48 dB
Dry alarm contacts yes
Miscellaneous
Built-in telescope yes
Local and remote loop sep. per E1-channel / all
Bit error rate indicator yes
10 LED bar-graph level indicator yes
Reducing power steps 16 dB + ATPC
Automatic power control ATPC 6 dB
MTBF more than 100,000 hours
Movement on holder azimut 360 deg., elevation +/- 25 deg.
Front screen defroster optional
Housing Aluminum, powder coated
Power supply 48 VDC and/or 115/230 VAC 50 .. 60 Hz
Power consumption (without defroster) 17 VA
Dimensions 790 mm x 306 mm x 283 mm
Weight 9,3 kg
Protection class IP 64
Operating temperature -40 .. + 50 deg. C (-40 .. +122 deg F)
Storage temperature -40 .. + 80 deg. C (-40 .. + 176 deg. F)
Wind load at 200 km/h max. 500 N